vignettes/create-hab-inputs.Rmd
create-hab-inputs.RmdThe following vignette provides a method for generating spawning, fry, juvenile, and floodplain rearing habitat inputs for the CVPIA salmon life cycle model. Readers will get a sense of how to use the data and functions from the cvpiaFlow and cvpiaHabitat packages. They will also be able to generate additional habitat inputs by modifying the functions within this document to accommodate new scenarios for the model.
The following packages are used by the functions. The packages dplyr, tidyr, and lubridate are useful for data manipulations. The package purrr is a functional programming toolkit to replace for loops.
library(dplyr)
library(tidyr)
library(purrr)
library(lubridate)
library(cvpiaHabitat)
library(cvpiaFlow)These functions are called by the other habitat setting functions.
# returns flow for each month of a watershed during simulation window
get_flow <- function(watershed, years=c(1980, 1999)) {
# get the flow values at the dates
dplyr::pull(dplyr::filter(dplyr::select(cvpiaFlow::flows_cfs, date, watershed),
lubridate::year(date) >= years[1],
lubridate::year(date) <= years[2]), 2)
}
# transforms to array data structure for SIT model input, [watersheds, months, years]
create_SIT_array <- function(input) {
output <- array(NA, dim = c(nrow(input), 12, ncol(input) / 12))
index <- 1
for (i in seq(1, ncol(input), 12)) {
output[ , , index] <- as.matrix(input[ , i:(i + 11)])
index <- index + 1
}
return(output)
}The following function outputs the three dimensional array that is used by the life cycle model to represent spawning habitat for each month and year in the simulation window. It handles the special case of Upper Sacramento River, which has two separate WUA area estimates for when the A.C.I.D. boards are in and out. The function takes the additional argument month for Upper Sacramento River in order to use the correct WUA relationship given the state of the boards. The A.C.I.D boards are in April 1st - October 31st. The function also sets the spawning area value to NA for watersheds without spawning. Additionally, here is the source code for set_spawning_habitat.
get_spawn_hab_all <- function(species) {
watersheds <- cvpiaHabitat::modeling_exist %>%
dplyr::filter(!is.na(FR_spawn), Watershed != 'Upper Sacramento River', Watershed != 'Upper Mid Sac Region') %>%
dplyr::pull(Watershed)
most <- purrr::map_df(watersheds, function(watershed) {
flows <- get_flow(watershed, years=c(1979, 1999))
habitat <- cvpiaHabitat::set_spawning_habitat(watershed,
species = species,
flow = flows)
tibble(
year = rep(1979:1999, each = 12),
month = rep(1:12, 21),
watershed = watershed,
hab_sq_m = habitat)
})
# deal with sacramento special cases
# upper sac
up_sac_flows <- get_flow('Upper Sacramento River', years=c(1979, 1999))
months <- rep(1:12, 21)
up_sac_hab <- purrr::map2_dbl(months, up_sac_flows, function(month, flow) {
cvpiaHabitat::set_spawning_habitat('Upper Sacramento River',
species = species,
flow = flow, month = month)
})
up_sac <- tibble(
year = rep(1979:1999, each = 12),
month = rep(1:12, 21),
watershed = 'Upper Sacramento River',
hab_sq_m = up_sac_hab)
hab <- dplyr::bind_rows(most, up_sac) %>%
tidyr::spread(watershed, hab_sq_m) %>%
dplyr::bind_cols(tibble(`Sutter Bypass` = rep(NA, 252),
`Yolo Bypass` = rep(NA, 252),
`Upper-mid Sacramento River` = rep(NA, 252),
`Lower-mid Sacramento River` = rep(NA, 252),
`Lower Sacramento River` = rep(NA, 252),
`San Joaquin River` = rep(NA, 252))) %>%
tidyr::gather(watershed, habitat, -year, -month) %>%
dplyr::mutate(date = lubridate::ymd(paste(year, month, 1, '-'))) %>%
dplyr::select(date, watershed, habitat) %>%
tidyr::spread(date, habitat) %>%
dplyr::left_join(cvpiaData::watershed_ordering) %>%
dplyr::arrange(order) %>%
dplyr::select(-watershed, -order) %>%
create_SIT_array()
return(hab)
}To create habitat arrays for the different species, you can call the above function with the appropriate species argument.
fr_spawn <- get_spawn_hab_all('fr') #fall run
sr_spawn <- get_spawn_hab_all('sr') #spring run
st_spawn <- get_spawn_hab_all('st') #steelheadIf you wish to modify the above function to make a new scenario, a possible way to override the default data output from cvpiaData::load_baseline_data is as follows:
all_model_inputs <- cvpiaData::load_baseline_data('fall')
# user must define get_spawn_hab_all_modified to their specifications
all_model_inputs$IChab.spawn <- get_spawn_hab_all_modified('fr') Or, you could swap out the watershed’s values with a vector of new values. This vector must be of length 252, with the first value representing the habitat value for 01/1979 and the last 12/1999.
This function generates either the fry or juvenile rearing habitat in each watershed for a specified species. The function handles the two special cases, the Upper Sacramento River and the Lower-mid Sacramento River. The set_instream_habitat function takes the additional argument month for Upper Sacramento River in order to use the correct WUA relationship given the state of the boards. The A.C.I.D boards are in April 1st - October 31st. The Lower-mid Sacramento River has two flow representations, one above Fremont Weir and one below. For the Lower-Mid Sacramento river, the set_instream_habitat function takes the additional argument flow2 and calculates the habitat at each flow then sums them proportional to the length of stream above and below the weir.
get_rear_hab_all <- function(species, life_stage) {
watersheds <- cvpiaData::watershed_ordering %>%
dplyr::filter(!(watershed %in% c('Sutter Bypass',
'Lower-mid Sacramento River', 'Yolo Bypass'))) %>%
dplyr::pull(watershed)
most <- map_df(watersheds, function(watershed) {
flows <- get_flow(watershed)
habitat <- cvpiaHabitat::set_instream_habitat(watershed,
species = species,
life_stage = life_stage,
flow = flows)
tibble(
year = rep(1980:1999, each = 12),
month = rep(1:12, 20),
watershed = watershed,
hab_sq_m = habitat)
})
# deal with sacramento special cases
# lower-mid sac
low_mid_sac_flow1 <- get_flow('Lower-mid Sacramento River1')
low_mid_sac_flow2 <- get_flow('Lower-mid Sacramento River2')
low_mid_sac_hab <- map2_dbl(low_mid_sac_flow1, low_mid_sac_flow2, function(flow, flow2) {
cvpiaHabitat::set_instream_habitat('Lower-mid Sacramento River',
species = species,
life_stage = life_stage,
flow = flow, flow2 = flow2)
})
low_mid_sac <- tibble(
year = rep(1980:1999, each = 12),
month = rep(1:12, 20),
watershed = 'Lower-mid Sacramento River',
hab_sq_m = low_mid_sac_hab)
hab <- bind_rows(most, low_mid_sac) %>%
spread(watershed, hab_sq_m) %>%
bind_cols(tibble(`Sutter Bypass` = rep(NA, 240),
`Yolo Bypass` = rep(NA, 240))) %>%
gather(watershed, habitat, -year, -month) %>%
mutate(date = lubridate::ymd(paste(year, month, 1, '-'))) %>%
select(date, watershed, habitat) %>%
spread(date, habitat) %>%
left_join(cvpiaData::watershed_ordering) %>%
arrange(order) %>%
select(-watershed, -order) %>%
create_SIT_array()
return(hab)
}To create habitat arrays for the different species, you can call the above function with the appropriate species argument.
fr_fry <- get_rear_hab_all('fr', 'fry') #fall run
sr_fry <- get_rear_hab_all('sr', 'fry') #spring run
st_fry <- get_rear_hab_all('st', 'fry') #steelhead
fr_juv <- get_rear_hab_all('fr', 'juv') #fall run
sr_juv <- get_rear_hab_all('sr', 'juv') #spring run
st_juv <- get_rear_hab_all('st', 'juv') #steelheadIf you wish to modify the above function to make a new scenario, a possible way to override the default data output from cvpiaData::load_baseline_data is as follows:
all_model_inputs <- cvpiaData::load_baseline_data('fall')
# user must define get_rear_hab_all_modified to their specifications
all_model_inputs$IChab.fry <- get_rear_hab_all_modified('fr', 'fry')
all_model_inputs$IChab.juv <- get_rear_hab_all_modified('fr', 'juv')Or, you could swap out the watershed’s values with a vector of new values. This vector must be of length 240, with the first value representing the habitat value for 01/1980 and the last 12/1999.
This function sets the floodplain rearing habitat for all the watersheds. The Lower-mid Sacramento River has two flow representations, one above Fremont Weir and one below. The flow value below the weir is used to calculate floodplain habitat area.
get_floodplain_hab_all <- function(watersheds, species) {
watersheds_fp <- cvpiaData::watershed_ordering %>%
dplyr::filter(!(watershed %in% c('Sutter Bypass','Yolo Bypass',
'Lower-mid Sacramento River', 'Upper Sacramento River',
'Upper-mid Sacramento River', 'Lower Sacramento River'))) %>%
dplyr::pull(watershed)
most <- map_df(watersheds, function(watershed) {
flows <- get_flow(watershed)
habitat <- cvpiaHabitat::acres_to_square_meters(
cvpiaHabitat::set_floodplain_habitat(watershed, species, flows))
tibble(
year = rep(1980:1999, each = 12),
month = rep(1:12, 20),
watershed = watershed,
hab_sq_m = habitat)
})
# deal with sac, already in square meters
# upper sac
up_sac_flow <- get_flow('Upper Sacramento River')
up_mid_sac_flow <- get_flow('Upper-mid Sacramento River')
low_sac_flow <- get_flow('Lower Sacramento River')
up_sac_fp <- cvpiaHabitat::set_floodplain_habitat('Upper Sacramento River', species, up_sac_flow)
up_mid_sac_fp <- cvpiaHabitat::set_floodplain_habitat('Upper-mid Sacramento River', species, up_mid_sac_flow)
low_sac_fp <- cvpiaHabitat::set_floodplain_habitat('Lower Sacramento River', species, low_sac_flow)
# lower-mid sacramento
low_mid_sac_flows1 <- get_flow("Lower-mid Sacramento River1")
low_mid_sac_flows2 <- get_flow("Lower-mid Sacramento River2")
low_mid_sac_fp <- cvpiaHabitat::set_floodplain_habitat('Lower-mid Sacramento River', species,
low_mid_sac_flows1, flow2 = low_mid_sac_flows2)
sac <- tibble(
year = rep(rep(1980:1999, each = 12), times = 4),
month = rep(1:12, 80),
watershed = rep(c('Upper Sacramento River', 'Upper-mid Sacramento River',
'Lower-mid Sacramento River', 'Lower Sacramento River'), each = 240),
hab_sq_m = c(up_sac_fp, up_mid_sac_fp, low_mid_sac_fp, low_sac_fp))
hab <- bind_rows(most, sac) %>%
spread(watershed, hab_sq_m) %>%
bind_cols(tibble(`Sutter Bypass` = rep(NA, 240),
`Yolo Bypass` = rep(NA, 240))) %>%
gather(watershed, habitat, -year, -month) %>%
mutate(date = lubridate::ymd(paste(year, month, 1, '-'))) %>%
select(date, watershed, habitat) %>%
spread(date, habitat) %>%
left_join(cvpiaData::watershed_ordering) %>%
arrange(order) %>%
select(-watershed, -order) %>%
create_SIT_array()
return(hab)
}To create habitat arrays for the different species, you can call the above function with the appropriate species argument.
fr_fp <- get_floodplain_hab_all('fr') #fall run
sr_fp <- get_floodplain_hab_all('sr') #spring run
st_fp <- get_floodplain_hab_all('st') #steelheadNOTE: The floodplain area is total wetted area and needs a suitability factor applied for all watersheds except the Sacramento Reaches, the Sutter and Yolo Bypasses, and the North and South Deltas which the floodplain area has already had a suitability criteria applied. See the apply suitability function for more details.
If you wish to modify the above function to make a new scenario, a possible way to override the default data output from cvpiaData::load_baseline_data is as follows:
all_model_inputs <- cvpiaData::load_baseline_data('fall')
# user must define get_floodplain_hab_all_modified to their specifications
all_model_inputs$floodP <- get_floodplain_hab_all_modified('fr')Or, you could swap out the watershed’s values with a vector of new values. This vector must be of length 240, with the first value representing the habitat value for 01/1980 and the last 12/1999.